AMREP INC -- MISTY LIQUIDATE -- 9150-00F045559
=====================  Product Identification  =====================

Product ID:MISTY LIQUIDATE
MSDS Date:04/12/1993
FSC:9150
NIIN:00F045559
=== Responsible Party ===
Company Name:AMREP INC
Address:990 INDUSTRIAL PK DR
City:MARIETTA
State:GA
ZIP:30062-2433
Country:US
Info Phone Num:404-422-2071/800-255-3924
Emergency Phone Num:404-422-2071/800-255-3924
CAGE:3V338
=== Contractor Identification ===
Company Name:AMREP INC
Address:990 INDUSTRIAL PK DR
Box:City:MARIETTA
State:GA
ZIP:30062-2433
Country:US
Phone:404-422-2071
CAGE:3V338

=============  Composition/Information on Ingredients  =============

Ingred Name:SULFURIC ACID (CONFIRMED HUMAN CARCINOGEN BY IARC - GROUP
    1) *95-4*
CAS:7664-93-9
RTECS #:WS5600000
OSHA PEL:1 MG/CUM
ACGIH TLV:1 MG/CUM=IC
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:BURNS, RAPID DESTRUCTION OF ALL TISSUE
    CONTACTED. EYES:/INGESTION: CORROSIVE. SKIN: CORROSIVE, DERMATITIS.
    INHALATION: RESPIRATORY IRRITATION, CORROSIVE. OVEREXPOSURE MAY
    CAUSE TOOTH EROSION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:CHRONIC COUGH, IRRITATION, BURNS.

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: FLUSH W/WATER FOR 15 MIN. INHALATION: MOVE VICTIM
    TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING. DRINK LARGE VOLUMES
    OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:CO2/DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED POSITIVE PRESSURE SCBA
    WHEN ANY MATERIAL IS INVOLVED IN A FIRE. USE WATER FOG TO KNOCK
    DOWN VAPORS.
Unusual Fire/Explosion Hazard:DON'T ALLOW WATER TO ENTER CONTAINERS
    VIOLENT REACTION RESULTS. SOLUTIONS IN CONTACT W/METALS FORM
    HYDROGEN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE & SOAK UP W/INERT ABSORBENT. SHOVEL/SWEEP
    & PLACE IN APPROVED DOT CONTAINER & SEAL FOR DISPOSAL. NEUTRALIZE
    AREA & DISPOSE OF MATERIAL PROPERLY.
Neutralizing Agent:SODA ASH

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN ORIGINAL SHIPPING CONTAINERS.
    KEEP CLOSED WHEN NOT IN USE. FOLLOW LABEL DIRECTIONS WHEN USING.
    SHELF LIFE ONE YEAR.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/LIQUID
    & BREATHING OF MISTS/VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NEEDED IN NORMAL USE & HANDLING.
Ventilation:NORMAL ROOM IS USUALLY ADEQUATE.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES & FACESHIELD
Other Protective Equipment:COVERALLS, RUBBER APRON & BOOTS, EYEWASH
    STATION & SAFETY SHOWER.
Supplemental Safety and Health
MATERIALS TO AVOID CONT'D: CARBIDES, FULMINATES, CHLORATES, NITRATES,
    PICRATES.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:640F
Vapor Pres:0.0038
Vapor Density:3.38
Spec Gravity:1.835
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS, CLEAR TO CLOUDY LIQUID W/NO ODOR TO MILD
    ACRID ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
SOLVENTS, OXIDIZERS, REDUCING AGENTS, COMBUSTIBLE & ORGANIC MATERIALS,
    ALKALIS, POWDERED METALS, AMINES. (SEE SUPP)
Stability Condition to Avoid:HEATING, ADDING WATER TO SULFURIC ACID.
Hazardous Decomposition Products:OXIDES OF SULFUR. HYDROGEN MAY BE
    EVOLVED IN CONTACT W/METAL.
Conditions to Avoid Polymerization:HEATING. WATER ON SULFURIC ACID WILL
    CAUSE SPLATTERING, FUMING & EVOLUTION OF HEAT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.